Axial Flow Fans, Axial Fans Manufacturers

Axial flow fans are mainly used for industrial ventilation, air conditioning and fumes exhaust.

Construction :
The body is fabricated from mild steel plates and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.

Impeller :
The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced.

Motors :
The standard A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature upto 40° C. Flame proofs vapour tight and other motors can be supplied on request.

Bearing :
Ball or Ball and roller bearings are fitted as standard.

Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.

The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.

V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and plummer blocks inside casing. The motor is mounted on oustering of the casing and shaft is driven with V- Belts.

Hot Air & Gas Application :
Fan is suitable for air and gas upto temperature of 65° C. Between 65° C and 150° C the fans are made up of
V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.