
::
WET & DRY DUST COLLECTION SYSTEM ::
Fan Manufactured
as per M/s ZURN INDUSTRIES, U.S.A
Efficiency
achieved above 85%
 |
|
DRY
TYPE DUST COLLECTION BAG FILTERS :
Mechanical Shaking Arrangement, Pulse Jet, Self Cleaning &
Manual Cleaning, Cyclone, Twin Cyclone, Multi Cyclone &
Bag Filter. Efficiency in the range of 99.5%.
Cyclone efficiency range 90% above 10 Microns.
|
 |
|
CYCLONE
WITH WET SCRUBBER :
The design of the scrubber has been made considering the gases
entering into a centrifugal type of impeller with no. of blades
& providing a disc at the top of the impeller and dripping
the water through a nozzle at the centre of the disc to maintain
the uniform water passing through the vein & scrubbing the
dust laden gasses and separating the dust.
|
 |
|
High
Efficiency ID Fan with simply supported bearing construction
& suction box.
|
| DESCRIPTION
:
1) Scrubber
2) Water Spray Pump
3) Water Spray Nozzle
4) Water Spray Disc
5) Centrifugal Ventury Scrubbing Pump
6) Pump
7) Float Valve
8) Filter Cloth for Water Filtration
9) Filer Holdings for SS Rods Frame
10) Fine Filter Filtration
11) Waste Water Drain
12) Drain Plug
13) Fine Filter Water Drain
14) Common Drain Discharge Pipe
15) Waste Water Tank
16) PRE Filter Water Tank
17) Fine Filter Water Tank
18) MIST elemeter with Drain Pump
19) Fan with Motor |

|

|

|
Universal
offers a wide range of air pollution control systems which includes
mechanical Fly-Ash Arrestor. High efficiency Bag Filters, Scrubber
Systems for Dust & Vapours etc Equipment and system installed
by Universal are tested by independent laboratories and found to meet
the norm of pollution control boards. Universal fluidized bed furnaces
not only helps in reduction of pollution by way of low SPM in flue
gases but also increases profitability by way of reduced Fuel Consumption.
Universal Fluidised bed furnace system is provided with automatic
fuel loading system and suitable for fuels like Coal, Husk, Bagasse
& other Agro Wastes. Universal has a 30,000 Sq. Ft manufacturing
unit equipped with modern machinery like Dynamic Balancing Machines
& Plasma Cutters etc. A well equipped design office & a team
of competent design service engineers are always available to work
on customers pollution control problems.
|